Windows 10 fast startup registry free

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

The best way to understand how the feature works is to step back and briefly explain hibernation. When using hibernation, Windows 10 saves the data in memory to the “hiberfil. Fast startup works similarly, but with one difference. Instead of saving the entire session onto the hard drive, the user gets logged off before the state is saved into the hibernation file, requiring less storage space and allowing quicker resume.

You can speed up the boot process with a great solid-state drive , or by trying fast startup. Once you complete the steps, the next time you start the device, you should notice faster boot times. Although fast startup is a nifty feature to make Windows 10 boot a lot faster, it’s important to note that fast is not always a good thing depending on your system configuration, and sometimes you may want to keep it turned off. For example, fast startup could be the root of boot issues.

It’s also not recommended to enable the feature on systems with limited hard drive space since it may not work correctly. Also, if you create a data partition on a dual-boot setup running Windows 10, data that you try to save using another version of Windows or Linux won’t commit to the storage. This setup could also cause data loss as fast startup will try to protect your primary system’s file structure from being changed.

To disable fast startup on your computer , use these steps:. After you complete the steps, when using the “Shut down” option, the computer will power off without saving the current state, causing the boot time to take longer but preventing issues in specific scenarios. After you complete the steps, the fast startup should now be available in the “Shutdown settings. If the option is still not available in Control Panel, then the device may not include support for the feature since only devices with support for the Advanced Configuration and Power Interface ACPI state of “S4” can use fast startup.

You can confirm the available power states available on your computer with these instructions. Mauro Huculak is technical writer for WindowsCentral. His primary focus is to write comprehensive how-tos to help users get the most out of Windows 10 and its many related technologies.

Windows Central Windows Central. Mauro Huculak. An S5 power state soft off is when your PC is shut down and rebooted completely. There’s no hibernation file and no saved user session. There is also a G3 power state, which is when your PC consumes absolutely no power and is completely turned off.

With fast startup enabled, choosing to shut down your PC might look like you’re completely shutting things down, but in reality, your PC is entering a mix between a shutdown and hibernation. A hibernation file is indeed used, although it is smaller than usual.

You’re logged off before the file is created, meaning your session is not recorded. The speed boost comes from the Windows kernel being saved on your hard drive and loaded when booting. While fast startup is a pretty harmless tool that can deliver a considerable startup speed boost, especially to PCs using hard-disk drives HDD , some people prefer to have their PC truly shut down when they click the “Shut down” button on their PC. In a post on the PC Master Race subreddit , a user pointed out that fast startup was re-enabled in a Windows 10 update following the release of the Fall Creators Update.

Following the April Windows 10 update, Fast Startup was again re-enabled on my own PC, and it seems to have kicked in again following the May Update. If you’re among the group of people who disable fast startup on their Windows 10 PC, you might want to recheck the settings to see if it’s still off.

Leaving fast startup enabled shouldn’t harm anything on your PC — it’s a feature built into Windows — but there are a few reasons why you might want to nevertheless disable it. One of the major reasons is if you’re using Wake-on-LAN, which will likely have problems when your PC is shut down with fast startup enabled. Others would like to save the hard drive space that is usually taken up with the hibernation file, and Linux users will likely see complications with dual boot and virtualization.

Furthermore, some users have even reported that power buttons on their keyboard will not work and fans in their PCs will continue spinning. These problems are by no means across the board, but they can prove to be frustrating. Finally, Windows 10 updates might not install properly if you have fast startup enabled.

Your reason for disabling fast startup might simply have to do with wanting to see your PC truly shut down when you choose to shut down, especially when working with a speedy solid-state drive SSD , or to have the processor CPU uptime reset after booting. If you’d like to see how your PC performs without fast startup enabled, you can disable it in just a few steps:.

If you want to re-enable fast startup at any point, simply repeat the steps so a checkmark appears next to Turn on fast startup. He focuses mainly on laptop reviews, news, and accessory coverage. He’s been reviewing laptops and accessories full time since , with hundreds of reviews published for Windows Central.

He is an avid PC gamer and multi-platform user, and spends most of his time either tinkering with or writing about tech. Windows Central Windows Central. Cale Hunt. Topics Windows 10 Help. See all comments If dual booting is the only reason then if you use boot into Other OS option in advanced boot options at startup, Windows will actually do a complete reboot without creating the hibernation file.

Actually i don’t have an issue with dual-booting on my computer and i have fast startup turned on,All I need to do is press the F9 key quickly at startup and that reveals a boot menu,From there i can select which operating system i want to use,or even boot from my recovery USB flash drive that I created if i need to reinstall the operating system,or use Gparted Live to fix errors on my hard drive.

That’s too bad. I used hibernation a lot to continue where I left, and it was just like the laptop was completely shut down, the only way to boot was pressing the powerbutton, so no accidental power on and a very hot laptop in my bag.

If I then booted into Linux, it would not reboot, but instead, Linux would only be able to mount the Windows partition as read only, to prevent issues with. If I then booted back into Windows, it would just resume. I disable fast boot because if I have problems booting into Windows, I fix files by accessing them through Linux.

I can’t do that if fast boot is enabled. Some of us are IT professionals in enterprise environments that would like to use these features and settings in their environment.

Don’t ask that here, this is a noobie site, they wouldn’t give a registry setting, or GP Policy setting, or how to set it up to be deployed that way, because that’s too sophisticated for the people who would be eading these articles But, there is this great thing called google There are many articles and how to guides detailing group policy editor and registry tweeks, maybe if you used the search button you would have found a few :.

Never heard of this, never had any problem with my many different machines, at all. So, there are no real benefits to using fast startup when my main drive is an SSD? A few seconds. Depending on drivers, maybe more. But no where near the gain as older HDD. Is Fast Start Up the reason my previously used apps are automatically re-opened upon reboot? It’s super annoying when I want a clean slate. It’s a dumb feature they decided to add to the Fall Creator’s Update.

Optional or forced? Optional but on by default since it benefits most users. What I don’t like is that the setting that controls it is not obvious or really noted, and it’s tied to another setting so they are either both off or both on. To disable, go into the Settings, then Accounts, then Sign-in options. Toggle off the Privacy option that says “Use my sign-in info to automatically finish setting up my device after and update or restart”. Another side effect of this setting being on is that whenever you reboot, the account that initiated the reboot will automatically have logged in session after a reboot.

If I am user U3 and initiate a reboot, when the system comes back online U3 automatically gets their profile logged in you don’t see this, it just happens in the background and you still have a logon screen you must authenticate through.

You can see this using Task Manager and looking at the Users tab. It’s not a huge deal but I when I first noticed this I thought I had some malware or remote infection on my system. Very annoying when it remount a Truecrypt drive automatically because I didn’t unmount it before shutdown because shutdown used to unmount it before. I wonder if this is why since the fall creators update my surface book drains battery and is warm in my bag again. I remember disabling this a while back.

 
 

 

Why You Need To Disable Fast Startup In Windows 10? – TechCult

 
Turn off Fast Startup · Type RegEdit in the search field on your Task bar and open the Registry tool. · On the right pane of the said location. Turn Fast Startup On or Off in Windows 10 contains both registry and batch files to enable or disable Fast Startup in Windows 10 quickly. Method 2: Disable Fast Startup using Registry Editor · replace.me Windows Key + R then type “regedit” in the run dialog box and hit Enter to open Windows